Steel-to-concrete bond after concrete splitting: test results

The definite trend towards the use of large-diameter rebars and the introduction of high-strength steels (f _y=500 to 600 MPa) make it necessary to study the effects of longitudinal splitting on the steel-to-concrete bond. The study of splitting effects requires firstly basic tests to be performed in order to gather experimental information on bond and confinement stresses acting at the bar-to-concrete interface. For this purpose, three series of tests were recently carried out at the Politecnico di Milano. The results make it possible to ascertain a few basic properties of the bond after concrete splitting, and to formulate empirical constitutive laws regarding the stresses and the displacements (bar slip and opening of the splitting crack). All specimens consisted of a short deformed bar embedded in a concrete block, which had a preformed splitting crack in the plane passing through the bar axis: twelve specimens (Tests A and C) were fitted up with a round deformed bar having crescent-shaped lugs (D_b=18 mm); seven specimens (Tests B) were fitted up with a specially machined deformed bar having a rectangular cross-section and straigth, lugs, so that concrete deterioration close to the bar could be investigated at the surface of the specimen, by means of the moiré technique. The tests were carried out at constant slip rate, up to very large slip values ( ); both the ascending and the descending branches of the stress-slip curves were measured, for four different values of the opening of the splitting crack. The agreement among the results of the three series is generally satisfactory and often very good: consequently, constitutive laws regarding the four main variables (crack opening and bar slip, shear and confinement stresses) can be worked out, as will be shown in a companion paper on constitutive relationships and on concrete deterioration at the bar-to-concrete interface.     

Neuroprotective Effects of Testosterone in the Hypothalamus of an Animal Model of Metabolic Syndrome

Metabolic syndrome (MetS) is known to be associated to inflammation and alteration in the hypothalamus, a brain region implicated in the control of several physiological functions, including energy homeostasis and reproduction. Previous studies demonstrated the beneficial effects of testosterone treatment (TTh) in counteracting some MetS symptoms in both animal models and clinical studies. This study investigated the effect of TTh (30 mg/kg/week for 12 weeks) on the hypothalamus in a high-fat diet (HFD)-induced animal model of MetS, utilizing quantitative RT-PCR and immunohistochemical analyses. The animal model recapitulates the human MetS features, including low testosterone/gonadotropin plasma levels. TTh significantly improved MetS-induced hypertension, visceral adipose tissue accumulation, and glucose homeostasis derangements. Within hypothalamus, TTh significantly counteracted HFD-induced inflammation, as detected in terms of expression of inflammatory markers and microglial activation. Moreover, TTh remarkably reverted the HFD-associated alterations in the expression of important regulators of energy status and reproduction, such as the melanocortin and the GnRH-controlling network. Our results suggest that TTh may exert neuroprotective effects on the HFD-related hypothalamic alterations, with positive outcomes on the circuits implicated in the control of energy metabolism and reproductive tasks, thus supporting a possible role of TTh in the clinical management of MetS.     

Structural Investigation and Molecular Modeling Studies of Strobilurin-Based Fungicides Active against the Rice Blast Pathogen Pyricularia oryzae

The increasing emergence of fungicide-resistant pathogens requires urgent solutions for crop disease management. Here, we describe a structural investigation of new fungicides obtained by combining strobilurin and succinate dehydrogenase inhibitor pharmacophores. We identified compounds endowed with very good activity against wild-type Pyricularia oryzae, combined in some cases with promising activity against strobilurin-resistant strains. The first three-dimensional model of P. oryzae cytochrome bc1 complex containing azoxystrobin as a ligand was developed. The model was validated with a set of commercially available strobilurins, and it well explains both the resistance mechanism to strobilurins mediated by the mutation G143A and the activity of metyltetraprole against strobilurin-resistant strains. The obtained results shed light on the key recognition determinants of strobilurin-like derivatives in the cytochrome bc1 active site and will guide the further rational design of new fungicides able to overcome resistance caused by G143A mutation in the rice blast pathogen.     

Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications

Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer blend and two different inorganic nanofillers (an organo-modified clay and a calcium carbonate with a hydrophobic coating) are used for the preparation of the nanocomposites. A detailed investigation of obtained materials is performed through rheological, mechanical, and optical characterizations. Adding nanofillers led to an increase of rigidity and tear strength of blown films without negatively affecting their ductility.     

A new short-path distillation system applied to the reduction of cholesterol in butter and lard

A molecular distillation plant, built particularly to increase the separation efficiency and to obtain safer working conditions, was tested to remove cholesterol from anhydrous butter and lard. A preliminary experiment was carried out with butter to evaluate the fractionation obtained at temperatures between 190 and 250°C and residual pressures between 10⁻³ and 10⁻⁴ torr. A second experiment was carried out at 185°C and at the maximum operational vacuum, evaluating the fractionation achieved within a time scale between 30 and 180 min. Cholesterol was almost completely removed during the second hour with minimal loss of low-molecular weight triglycerides. An experiment was carried out with lard at 250°C and maximum achievable operational vacuum (10⁻⁴ Torr), lasting approximately 6 h, and cholesterol was removed almost completely during the second hour without significant modifications in the triglyceride composition. This situation remained constant throughout the duration of the test.     

Cable-direct-driven-robot (CDDR) with a 3-link passive serial support

Cable-direct-driven-robots (CDDRs) provided with a passive serial support represent an interesting and rising evolution of planar cable robots. The paper is devoted to present and analyze a novel CDDR robot. The robot consists in a fully actuated CDDR supported against loading normal to the motion plane with a 3-link passive planar serial manipulator. This hybrid structure combines positive features of both parallel and serial architectures, and prevents out-of-plane movements without the necessity for the robot to be supported on the motion plane. The adoption of a 3-link serial manipulator ensures a greater workspace area compared with similar structures that adopt a smaller number of links, and improves specific characteristics of their dynamics. Nevertheless undesired oscillations may occur since the serial manipulator is underconstrained. For this reason damping elements are inserted in the structure. Simulation examples are presented to demonstrate the novel CDDR concept and its dynamics. In addition, a strategy to select proper values of damping coefficients is presented.     

<Superscript>1</Superscript>H NMR characterization of milk lipids: A comparison between cow and buffalo milk

Characterization of the lipid fraction of raw cow and buffalo milk samples, collected in different breeding areas in Apulia, a region of southern Italy, were performed by means of ¹H NMR. The aim of this work was to establish whether FA composition data obtained by ¹H NMR can be used in the differentiation of buffalo and cow milk samples according to species. A complete assignment of the signals present in the spectrum was attempted by COSY, heteronuclear coherence spectra. Quantification of FA was carried out by inserting the integrals of particular peaks in suitable calculations. Multivariate statistical analysis, conducted on the results of the quantification, permitted buffalo and cow milks to be distinguished.     

Synthesis, fabrication and characterization of poly[3-3′(vinylcarbazole)] (PVK) Langmuir-Schaefer films

Poly[3-3′(vinylcarbazole)] (PVK) was synthetized with N-vinylcarbazole as monomer by oxidative polymerization with ferric chloride. The resulting polymer was then deposited on various solid supports by using Langmuir-Schaefer (LS) method. The pressure-area isotherm of PVK revealed the possibility of compact monolayer formation at air-water interface. Different layers of PVK were doped with iodine vapours. Both scanning probe microscopy and optical microscopy images indicated a good uniformity of the films. The morphology and the thickness of PVK films were investigated using atomic force microscopy. The voltammetric investigation of I₂ doped PVK showed a distinctive electrochemical behaviour. The photoinduced charge transfer across a donor/acceptor (D/A) hybrid interface provided an effective method to study the photoelectrochemical properties of the composite LS films.